EM711 - RS232/ RS485 TO ETHERNET CONVERTER

EM711 is a RS232/RS485 to Ethernet Converter which can be used to connect RS232/RS485 serial devices to an Ethernet LAN/WAN or to any other device with Ethernet ports. This converter can provide reliable communication on Ethernet. This is a low cost converter and hence can be used to IP enable serial devices quite economically

EM711 has one DB9 female connector for RS232 connection and a pluggable connector for RS485 on the serial side. On the Ethernet side the converter is provided with a 10/100 Mbps Ethernet RJ-45 connector. Ethernet port will auto-select 10BaseT or 100BaseTX. On the Ethernet side EM711 will support TCP, UDP or Telnet and can be configured as a client or server.

Specifications

Serial port

Standard
RS232 or RS485
RS-485 signal
D+, D-
Baud rate
150-230400bps
Data bits Parity
7bit, 8bit
Data Transmission
AutoDirection Enables Driver
Automatically on Transmission

Ethernet port

Standard
Accord 10Base-T/100 Base-T standard
Protocol
Support TCP, UDP, APR, ICMP and DHCP protocol
Signal
Rx+, Rx-, Tx+, Tx-
Working format
Support Server and Client mode
Rate
10/100Mbps, full-duplex or half-duplex
Transmission
100m
Electromagnetism Isolate
1.5KV
Connector
RJ45

Power

Input Voltage
+9V DC
Current (Max)
100mA

Environment

Working temperature
-10 to 65 Deg C
Storage temperature
-10 to 70 Deg C
Humidity
Relative humidity 5% to 95%
Download Brochure
Enquiry Form